Linksys RE6400 Reset: The Ultimate Solution to Extender Issues

There is no doubt that RE6400 is one of the most brilliant offerings by Linksys. That is why more and more people are installing them in their houses. But, it never means that users owning this WiFi range extender model never face any kinds of problems. Well, whatever the problem is, the ultimate solution of doing Linksys RE6400 reset will resolve them forever. Mentioned in this post are the instructions that you must follow if you want to perform a factory default reset of your range extender. But, before that, we want you to have a look at the cases when you might need to reset your range extender.

When to Reset Your Linksys RE6400 Extender?

The table given below will provide you with 3 different situations in which you can opt to reset your WiFi range extender.

Apart from the above-given situations, you are free to reset the RE6400 WiFi range extender if it is not giving you desired outcomes i.e. you are getting poor internet speeds. Although checking wires and the placement of the range extender can also help you in that case, you should reset if nothing works. Now, move to the next section to learn how to reset your Linksys WiFi range extender.

How to Reset Linksys RE6400 WiFi Range Extender?

Resetting the Linksys extender is completely about wiping its customized configuration. Thus we recommend you to be very careful regarding the steps and the factors involved in the process. Below are the instructions that will help you accomplish the task of restoring your Linksys range extender to the default factory settings.

1. First of all ensure that your extender is plugged into an up-and-running power socket.
2. Once done, disconnect all kinds of devices connected to the Linksys RE6400.
3. Yes, wired devices are also supposed to be disconnected from your range extender.
4. Now, check all sides of the extender and find the Reset button.
5. The button is generally located beside the WPS button.
6. Using a sharp object, press the Reset button.
7. Do not hurry! Wait for at least 7 seconds.
8. Your extender will now flaunt the default factory settings.

The Linksys RE6400 factory reset means that the extender is now running on the default values of the username and password i.e. admin and password respectively. Not only this, but it will also make it possible for you to access the extender.linksys.com login URL that is too difficult to access when the extender and router are sharing a wired connection. All this happens because the router assigns a new IP address to the extender for easy communication.

What to Do After Linksys RE6400 Reset?

We’ve already told you that the extender will start flaunting the default settings after a factory reset. It is a sign that you will have to make it up and running once again to resume browsing and other numerous online services. For your ease, we have jotted down the instructions to set up the extender using the WPS approach.

1. Be very sure that you have placed the RE6400 extender and router in the same room.
2. Power up the router and extender if you haven’t done it yet.
3. Once the light on both the devices gain some stability, press the router’s WPS button.
4. The Linksys RE6400 extender’s WPS button needs to be pressed now.
5. Let the WPS connection get established.
6. You should repeat the previous 2 steps if your home router is dual-band.

To Sum Up

In the very beginning, we told you that you can perform a factory default reset of the Linksys RE6400 range extender in numerous cases. Since we provided you with the detailed steps to go about the Linksys RE6400 reset process, we are expecting that you will be able to complete the process without any difficulty. And yes, do not forget to make your extender functional again with the help of the WPS approach that we’ve highlighted in the penultimate section of the blog. Update the extender’s firmware too so that you can avoid potential threats to the extender’s network.