Does your Linksys WiFi range extender stop functioning out of nowhere? Do you often face connectivity issues with the extender? Are you unable to complete your online tasks due to this very problem? If all three questions have been answered yes, then know that the Linksys WiFi extender not working properly issue has knocked at your door. What can be done to do away with it in a matter of minutes? The same has been discussed in the information given below. Thus, don’t waste time and start following the hacks.
Solutions: Linksys WiFi Extender Not Working Properly
Numerous causes affect the performance of your Linksys range extender. But, the LAN cable joining it to the main router is of utmost importance. It is because the router serves as a source of internet for the range extender. If the cable connected to both devices is not in working condition then the non-working status of the extender is inevitable. Thus, before getting involved in other complex techniques, you are suggested to check the condition of the cable and get it replaced in case of any damage. Moreover, ensure that the correct ports of your devices have been put to use for the extender-router connection. In case you are still unable to kick off the issue, you can rely on the techniques mentioned here:
1. Install the Latest Firmware Version
Do you remember the last time you upgraded the firmware of your Linksys device? No? Well, then there are high chance that the firmware of your extender has become outdated. Keep in mind that running the extender on outdated firmware means forcing it to work on older features. Therefore, you need to upgrade the extender’s firmware as soon as possible to fix the Linksys WiFi extender not working properly issue. Here’s how you can execute the firmware update using the Linksys WiFi extender login URL:
- Connect your computer directly to the range extender using an Ethernet cable.
- Download the latest firmware file for your extender from the Linksys Download Center.
- Once done, visit extender.linksys.com.
- Log in to your extender with the valid admin info and click the Administration tab.
- Locate and select the Firmware Upgrade option.
- Click Select a File option under the Manual Update label.
- Select the extender’s firmware file and hit Open.
- Click Start Upgrade.
The firmware of your extender will start getting upgraded. You can see the progress of the process on the same page. Once the firmware gets updated, check whether the Linksys WiFi extender is working properly or not. If not, move to the next hack.
2. Power Cycle the Range Extender
Sometimes, a simple power cycle can also help you address problems like the Linksys WiFi extender not working properly. Wondering how? Remember that your WiFi extender is a networking device and it is very much capable of falling victim to technical glitches. Thus, you should look forward to getting rid of them before time runs out. Nothing works better than a power cycle in this scenario. The steps given below will help you learn how to restart or power cycle the Linksys extender properly:
- First of all, power down the router.
- Now, switch off the extender and disconnect the cable connecting it to the router.
- Wait for 20-30 minutes.
- Re-establish the LAN connection between the extender and router.
- Switch on the WiFi devices in the same sequence as you powered them off.
Once the LED lights on your devices stabilize, see to it that you are still experiencing problems with your range extender. If yes, then consider rebooting the entire home network. It means you have to reboot the modem too. However, if you do so, make sure that the modem is powered down before the router. Also, it must be switched off before the router. The rest of the power cycling procedure will remain the same.
In Conclusion
By taking care of the points mentioned above, you will be able to fix the Linksys WiFi extender not working properly issue with ease. However, you also need to take care of the distance at which the extender sits away from the main router. It needs to be optimal. Furthermore, be very sure that the WiFi signals emitted by your extender are not getting deflected. It is possible only if your extender is located in an interference-free zone.
Disclaimer: Linksyssmartwifi.site is an information provider. It is not affiliated with any third-party brand or manufacturer. Linksyssmartwifi.site provides information on troubleshooting issues related to various extenders, routers and similar networking devices. Our services are provided only on demand to users.