Chat with us, powered by LiveChat Unable to Connect to a Linksys Range Extender Wireless Network

Fixed – Unable to Connect to a Linksys Range Extender Wireless Network

Linksys Range Extender, Troubleshooting Tips

Experiencing an error while using the Linksys range extender means no WiFi or internet. Nowadays, one of the most common errors that people face with their Linksys device is ‘unable to connect to a wireless network’. If you are also facing the same issue, then we assure you that this post will help you overcome this issue instantly. Read on.

extender.linksys.com

Update the Firmware of Your Wireless Range Extender

You will have to verify whether you are using an upgraded and latest version of firmware or not. Well, sometimes making use of an old version results in unable to connect to wireless network issue. Therefore, it is very important to update the firmware on your Linksys device timely. You can update the Linksys extender firmware via its default web-based address, i.e. extender.linksys.com. If you come across any type of technical issue while updating the Linksys firmware, reach out to our experts without any delay.

Check the MAC Filter Status for Linksys Wireless Router

If you are using an older version of the Linksys router, then you must know the fact that it comes with an option called MAC address filtering. If you experience an issue while setting up your extender, then it is essential to verify if the MAC filtration is accurately configured for Linksys smart WiFi router.

Linksys Range Extender

Check Adapters Drivers

Occasionally, an outdated or old driver could also cause ‘unable to connect to Linksys extender’ issue. So, in order to fix this issue, you must check that all computer/ laptop adapters that are linked to the internet/ WiFi are up-to-date. In case the adapter you are using isn’t updated by the latest version, then you are supposed to update it or switch to a new one.

Check if the Passphrase Key to the Network is Correct

Remember, you can only access the network and Linksys Range Extender Login page when you are using the correct passphrase (password). So, we insist you enter the password carefully while using the internet. If you are using the right passphrase and still not able to use or access the internet, then there must be issues with your Linksys device.

To resolve this issue, you have to place your extender and the router closer to each other. Also, remember that your router shouldn’t be overheated, outdated, or overloaded with malicious and large files. Moreover, place both the devices at a central location of the house. But do not place them under a table, inside armoire or back of anything. Both of them must be placed at a higher shelf.

If the issue still persists, then opt to reset your range extender.

Reset Linksys Range Extender

First of all, you have to locate the reset hole on your range extender. After that, grab a pin or a paper clip and insert it into the reset hole. On the other hand, you have to hold it for a few seconds and then release it slowly.

And that’s it. These were the things that you have to consider and apply them all calmly. In case you are still unable to connect to Linksys extender, then feel free to get in touch with our experts.

Tags

Disclaimer: linksyssmartwifi.site is not affiliated with any third-party brand or manufacturer unless specifically specified. It is a website providing WiFi information on troubleshooting and resolving issues related to various extenders, routers and similar networking devices. It's an independent service and support provider.