Linksys WRT320N Port Forwarding Setup: Easy Instructions

Want your Linksys WRT320N router to be accessed by a limited number of servers only? We suggest you open the router’s port for those specific applications and data. Wondering how it will happen? Well, all you’ve got to do is go through the Linksys WRT320N port forwarding setup steps. This post is intended to help you understand Linksys router port forwarding from basics to advanced level with respect to the WRT320N router model. So, read on.

What Will Port Forwarding Do to Linksys WRT320N?

You might know that a Linksys WiFi router arrives with inbuilt firewalls that perform the task of creating a shield against malicious programs or hackers. The same is the case with the WRT320N router. This way, your home network stays protected. But, there are times;these firewalls block access to certain applications or programs that you want to access. The Port Forwarding feature will allow you to use those services if you enable it.

To put it in easy words, the Linksys WRT320N port forwarding setup via the Linksys router login URL will allow the desired internet applications to bypass the router’s firewall. But, you are required to set some rules for that. The rules are required so that your router will be able to decide when to open a particular port for the requested data. Now, let’s move ahead and discuss the steps that you should follow to configure port forwarding on your Linksys gateway (router).

How to Do Linksys WRT320N Port Forwarding Setup?

Before starting the port forwarding setup process, we want you to refer to the device’s manual and check which ports you should open. The reason being, different applications require different ports to be opened. You are also required to note down the IP address of the device plus the computer where you want to forward the ports. Now, take a walk through the following points to set up port forwarding rules on your WRT320N WiFi router brought to you by Linksys:

• Open a browser on your computer and access the Linksys WRT320N local access interface.
• The next step is to click the ROUTER SETTINGS menu and expand it.
• Select the SECURITY option and hit APPS AND GAMING.
• On the next window, click SINGLE PORT FORWARDING.
• Choose ADD A NEW SINGLE PORT FORWARDING.
• Input the required details such as APPLICATION NAME, EXTERNAL PORT, and INTERNAL PORT. You also need to choose the PROTOCOL that corresponds.
• Check the ENABLED checkbox if not selected.
• Hit SAVE > APPLY > OK.

This is how you can complete the Linksys WRT320N port forwarding setup process in a few simple steps. But, these steps were about the SINGLE PORT FORWARDING which is just one type of port forwarding. FYI, this port forwarding is all about setting up public servers one by one on the network. Services like web servers, FTP, and email servers plus internet applications come under this category.

Note: Your targeted computer or device should be assigned a static IP. Only then, you will be able to complete the port forwarding process.

How to Set Up Port Range Forwarding on Linksys WRT320N?

The port range forwarding is another type of port forwarding that Linksys router allows. You can set up public services in a group or a range of ports. You can use this type for servers and online games. Here’s how you can complete the Linksys WRT320N port forwarding setup process for a range of ports:

• Visit the Linksys WRT320N login URL and input the router password.
• You will reach the router’s local interface.
• Move to the SECURITY tab followed by ROUTER SETTINGS.
• Navigate to the APP AND GAMING tab and select PORT RANGE FORWARDING.
• Select ADD A NEW PORT RANGE FORWARDING.
• Enter the required info like (APP NAME, STATE AND END PORT, IP, etc.).
• Click SAVE > APPLY > OK.

The Final Thoughts

That’s all you need to learn about the Linksys WRT320N port forwarding setup. We are now hoping that you’ve successfully opened the router’s port to access a desired application or service. Just in case you face any issues while enabling the port forwarding rules, we suggest you ensure that you’re inputting the correct details like the IP address of the device and State and End ports. And yes, be very sure about the fact that the targeted device i.e. the computer on which you want to use such services must be assigned a static IP address.