A Paleoer WiFi extender is amongst those networking gadgets that can help you bid farewell to internet dead zones in the house forever. Thus, it would be a great decision if you decide to complement your existing router with a range extender brought in by Paleoer. This is to inform you that the addition of a WiFi range extender will improve the wireless internet coverage. It will not increase the internet speed you are getting from your ISP. So, to improve the internet coverage, you must purchase the extender. In this post, we will try to explain the process of connecting a Paleoer extender to a WiFi router from Linksys.
How to Connect Paleoer WiFi Extender to Linksys Router?
Although we’ve taken the example of a Linksys router, you can connect the WiFi router you own using the same steps. Apart from this, the steps mentioned in this post are written with respect to the connection process via a mobile phone. You are free to use these steps to connect your devices via a PC or a laptop.
Basic Preparation to Connect Paleoer Extender and Router
The steps to connect your WiFi range extender and the Linksys WiFi router will be discussed later. But, before that, we want you to ensure that you have set up your router using the correct Linksys router login details. Well, that is not enough!You are also supposed to do the following:
- Note Down the Linksys Router’s WiFi Details: Take notes of the SSID that your Linksys router is broadcasting along with the network key i.e. the WiFi password. For easy understanding, let us assume that your Linksys router’s SSID is “LinksysWiFi” and the network key is “LinksysPassword”.
- Factory Reset Your Paleoer Range Extender: Perform a factory default reset of your Paleoer extender by pressing its Reset button. It is important that your range extender runs on the default factory settings if you want to connect it to a router or another gateway.
Steps to Connect Paleoer WiFi Extender to Linksys Router
To connect your WiFi range extender to a Linksys wireless router, it is advised that you follow the steps mentioned below. However, you have to be very sure about the thing that your WiFi router has an active internet connection. Otherwise, you will not be able to connect your devices successfully:
- Bring your Paleoer device into the room where you have placed your Linksys router.
- You are supposed to keep your devices within 20ft gap.
- Ensure that your WiFi router is powered up and its WiFi light is stable.
- Connect your WiFi range extender to a working wall outlet in the room and switch it on.
- Now, unlock your mobile phone and open its WiFi utility.
- The list of available networks will show up on the screen.
- You need to choose the network that corresponds to your Paleoer extender i.e. Paleoer-xxxx.
- Connect to it as it is an open network.
Note: It is not necessary that the default SSID of your extender will be Paleoer-xxxx. The 4 xs here may be digits or alphabets. Thus, do not get confused if you see Paleoer-123a.
- Since you are connecting to the extender’s network for the first time, the management interface will open up automatically.
- In case the web interface does not appear, you need to access it.
- Locate the address field of the web browser and input the IP 192.168.10.1 IP.
- Proceed by tapping the Enter symbol.
- A window named User Login will appear.
- Enter the default password i.e. admin into the empty field.
- Make sure that the keyboard of the mobile phone does not capitalize “a”. You might fail otherwise.
- Tap the Login option.
- The Software Management Interface will show up now.
- You are suggested to tap the Repeater Mode option.
- Now, you need to choose the WiFi network that you want to extend.
- As you are connecting your Paleoer WiFi extender to Linksys router, choose the network named “LinksysWiFi”.
- Wait for 20 seconds.
- Input the password into the Password field.
- According to the example we are using, you should input “LinksysPassword”.
- Tap Save.
- Be sure that you are entering the password correctly.
- You will be notified that the Linksys router network has been extended successfully.
- The new network name will be your existing router’s SSID followed by “_Ext”. Here, it will be “LinksysWiFi_Ext”.
- The WiFi password will be as same as the router’s WiFi password.
- Try to connect your other WiFi clients to the newly extended WiFi network.
- If you become successful, the connection process is completed.
The steps to connect Paleoer extender and the Linksys router end here. The aforementioned instructions will apply equally if you are attempting to perform Linksys extender setup i.e. you are connecting your router to the Linksys WiFi extender.
The Concluding Words
Millions invest in a WiFi range extender to improve the network range offered by a Linksys WiFi router. Paleoer WiFi extender due to its amazing features a great option for the network extension process. We are hopeful that after following the instructions here, you will be able to connect your Linksys router and the Paleoer device.
Disclaimer: Linksyssmartwifi.site is an information provider. It is not affiliated with any third-party brand or manufacturer. Linksyssmartwifi.site provides information on troubleshooting issues related to various extenders, routers and similar networking devices. Our services are provided only on demand to users.